General questions
Do you need help or other application tips? Our experts provide the answers to the most important questions here.
Resin does not harden or remains sticky?
- Incorrect mixing ratio
- Insufficiently mixed materials
- Processing temperature too low
- Processing after pot life
Resin stays soft and flexible?
- Incorrect mixing ratio
Why is the resin dull after drying out?
- Insufficient mixing
- Crystalline material
- Impurities in the pouring mold or resin containers
Resin cannot be sanded?
- Insufficient drying out
- Room temperature too low when drying out
Can the resin be warmed in an oven to dry out more quickly?
- No, accelerated drying does not allow for proper venting
When can air bubbles or foam formation in the resin be removed using a dryer or gas flame?
- This is possible up to 48 hrs after pouring
What happens if the resin crystallizes in the original container?
- Storage temperature below 17°C
- The material can be made fluid again by slowing warming to max. 30°C, we recommend you filter the resin before use
Why does the clear coat reverse when recoating?
- Mold separating agent or silicon residue on the surface
- Clean with silicon remover
How can i dispose of ETOPOX Wood?
- Dispose of dried out resin remains in the household garbage
- Do not pour liquid resin down the drain
Where can i find information for a doctor in the event of an accident?
- On the safety information sheet included
- Take the safety information sheet to the doctor
Why are tears visible in the hardened resin?
- Layer too thick, > 5 cm in one pouring action
- Temperature too high when processing and drying out
Which sticking tapes are suitable for the seal?
- Trade standard packaging sticking tape, these should be tested in advance
Can i use screws in ETOPOX Wood?
- Yes. Subsequent drilling of holes and sticking of threaded dowels is possible for screws and fixings
Is ETOPOX Wood heat resistant?
- ETOPOX Wood should be stored in a liquid state in accordance with the technical leaflet. The material is heat-resistant when hardened, however contact with very hot objects is not advised.
Is ETOPOX Wood chemically resistant?
- The fully hardened resin is resistant to standard household cleaning agents (not scouring agents) and foodstuff such as red wine, mustard, etc. Detailed information can be found in the technical leaflet.